[bomma90]

i had already presumed that they wouldnt be making one, but cheers for confirming

 

[01yzf6]

I ordered a couple oem fenders from hondaparts-direct (they're cheap!) and I'm going to try making one myself. I spent some time studying the lines on the stock fender and I think cutting it down and shaping it with fiberglass should be (relatively speaking) easyish.

Edit: Still interested in one I can just buy and not have to go through the trouble though

Did you ever get to do this ?

 

[jinxed]

Did you ever get to do this ?

I've got the fender cut down, but I stay very busy and I ride the bike nearly every day so I haven't been able to take it apart for test fitting. It will soon be too cold to ride and I promise to update once I've had a chance to make progress.

 

[giraffe]

finally got an answer from the guy doing the tailtidy.
two models as in the photos attached.
if there is a group buy, i can help. but one by one, i dont have time. a lot busy nowadays.

I would be interested in the one with the lights and plate bracket. The cops around my place would have a blast pulling me over for the integrated system. No way would that fly here. I just got back from Thailand a month ago--should have just gotten it then huh?

 

[Wizard6733]

You got one! :hellobye

Now let's see some pictures of it installed :thumbsup

:beers

I have it at a friends garage right now but im hoping to get to workin on it during thanksgiving break or around Christmas time when i have a few days off work (cause i got all my Targa stuff in also ). But i really appreciate you going thru the time and trouble of hookin me up :spin

 

[Chscbr500]

I want one too!

 

[bbstep]

I agree! I sent 500r Pilot a PM but haven't heard anything yet. **Fingers crossed**

 

[ICEMAN809]

I've been endlessly searching for a "real" tail tidy and this finally looks like a solution! I am down for one without a license plate bracket and lights. Please let there be a group buy, or i'll buy it straight up!

 

[Chscbr500]

I sent pilot a pm about a week ago too. I am still waiting, I really want to get a hold of one. I am also down for a group buy. But if not I am willing to buy individually too.

 

[jice]

Has anybody had any luck getting one of these kits from the guys over in Bangkok?? I tried getting a hold of them thru Facebook with no luck. They didn't respond to my purchase inquiry. I would pay good money for one of those fender eliminators!

 

[RyanB]

I've tried to contact him on Facebook as well to no avail. I'll continue to search online though... I definitely want to do one of the integrated tail light kits.

 

[Guuggel]

Can someone tell me how much a Finnish 200mm (length) x 165mm (width) plate would cover of the R&G no-cut fender eliminator?
Honda CBR500R/CB500F/CB500X ('13-) - Tail Tidy Licence Plate Holder LP0141BK

I'm keen on buying the kit to get rid of the stock snowshovel, but I can't tell how the plate fits on the kit. There shouldn't be any problems? i'm mostly worried if the length of the plate isnt enough and the plate holder would show too much under the plate.
Or any else options instead of that R&G, preferably in Europe?

 

[osmirvillanueva]

I'm down for the group buy if it's still an option... Or anyone with updates as to any real fender eliminator kits???

 

[wolf66]

I just wanted to tidy mine up some but not spend any money..

....so I took off the bracket the tag is bolted to and cut a few inches off the plastic, the tag then bolts to the holes the bracket was attached to:

before/after/removed

 

[starshot21]

....so I took off the bracket the tag is bolted to and cut a few inches off the plastic, the tag then bolts to the holes the bracket was attached to:

before/after/removed

This is good lol
I was so desperate for a cleaner look I even did it myself.
Finally got that fender delete from Bangkok. Part actually looks pretty solid (I was kinda expecting some cheap piece of way overpriced plastic).

I expect tonight I will have time to figure out how to install it. Needless to say in case you guys don't already know; this is likely a permanent mod. i.e. There will be no going back to stock after you mod your bike to fit the part from Bangkok. You will not only have to cut the subframe, but also your brake light apparently and another piece of plastic where the stock fender meets the underside of your bike.

 

[starshot21]

Here are pictures the guy sent me as instructions for installing the part.

 

[carbonado]

....so I took off the bracket the tag is bolted to and cut a few inches off the plastic, the tag then bolts to the holes the bracket was attached to:

before/after/removed

I did the same. A huge improvement in appearance for just a little work.
I retained the side reflectors though. It looks like you added two mini side reflectors to the license plate. What did you use?

 

[David Osborne]

Try looking here, Anunaki-parts I saw two kits so far.

 

[George Type-S]

I did the same. A huge improvement in appearance for just a little work.
I retained the side reflectors though. It looks like you added two mini side reflectors to the license plate. What did you use?

It looks like he used this:
License Plate Bolt AND Wing NUT SET With Round RED Reflector | eBay

It might sound like a big job, but has anyone tried fitting the 2016 tail onto a 2015? If that works, then you can use this:
Honda CBR500R/CB500F (2016+) Fender Eliminator - Vagabond Motorsports

 

[Aidemoz]

found this!
best lookign fender eliminator/tail tidy around. cheap too.

Where do I get one?!