Honda CBR 500 Riders Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Gday all,

recently purchased a 2016 Honda CBR500 with a tail tidy and flush mount side indicators already done. However when using the left indicators the front flashes and clicks way too quickly and the rear doesn’t work at all. When using hazards the front is fine and the rear still does not work at all. Have checked fuses and bulbs but no joy. Any suggestions?
 

·
Registered
Joined
·
1,186 Posts
Quick flash is normal when there is an issue anywhere along the circuit. The issue with your rear signals is likely the cause of the quick flash. You'll need to trace the issue. I would start checking the wiring connections to your rear indicators. It's under the tail fairing. Easy to check. If that doesn't seem to be the issue then get yourself multimeter and check for power. If you've got power at the connection or not will tell you which way to go. Good luck.

Sent from my SM-G986U using Tapatalk
 
  • Like
Reactions: Bazza
1 - 2 of 2 Posts
Top