Honda CBR 500 Riders Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 · (Edited)
When i apply front brake i hear a click..just one.. i have checked the disc/rotor and thats fine. But caliper has very very slight movement side to side..all bolts are torqued to correct settings ...it has only started since i changed pads few month ago..brak8ng isnt affected at all......any input would be helpful...its a 2014 CBR 500R and ABS is fitted
 

·
Registered
Joined
·
645 Posts
You may have to dismantle again, check the pad retaining pin has the little seal on the end, also check pad retaining spring position and check to see if it is broken. Check the pads are a good fit in the caliper. If you have the old pads you could compare with the new ones to see how well they fit the brake caliper.
 
1 - 2 of 2 Posts
Top