Honda CBR 500 Riders Forum banner
1 - 6 of 6 Posts

Registered
Joined
3 Posts
Discussion Starter · #1 ·
Installing a brake light flasher. There are three wires on the connector a solid green a mostly green with a blue stripe and a pink with a blue stripe. Does anyone know which one is the brake light wire and which one is the ground or neutral. Thanks for anyone's help.
 

Attachments

Registered
Joined
652 Posts
Solid (dark) green cables are used for ground, which is a general rule so you can always identify those.

The pink/purple cable is the always-live tail light, and the green/blue cable is live for the brake light.
 

Registered
Joined
3 Posts
Discussion Starter · #3 ·
Thank you very much you are absolutely correct and my LED brake flasher circuit GS 100A works perfectly...4 short bursts 4 long bursts and then solid on when braking. got it on Amazon for $8
 

Registered
Joined
1,431 Posts
Please provide a link to the flasher you bought.

Thanks & Ride safely
 

Registered
Joined
1,188 Posts
I think flashing brake lights are a good idea, but I think most of these relays require too much work and have too much going on. A plug and play bulb is sufficient in my opinion. Here's mine.

Sent from my SM-G986U using Tapatalk
 
1 - 6 of 6 Posts
Top