Honda CBR 500 Riders Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello all,

My Dad reversed his bike into mine and hit the front right turn signal and snapped it. Now it's just dangling.
I bought new turn signals but am unable to figure out how these come off.
I got a nut off of the turn signal but now it's still stuck in there. At this point it seems like it would be easier to take off the fairing.
Any help would be appreciated.
 

·
Registered
Joined
·
390 Posts
Easiest way is to retain/reuse the "base", reuse the internal bulb holder & wire (unscrew the bulb holder and it will slip out together with the wire; just replace the dangling shell (& lens).
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Easiest way is to retain/reuse the "base", reuse the internal bulb holder & wire (unscrew the bulb holder and it will slip out together with the wire; just replace the dangling shell (& lens).
This is actually what I happened to do because the wire on the new light was too short. It was pretty easy. I didn’t know I had it all apart already until I took the side fairing off and noticed it was already disassembled.
 
1 - 4 of 4 Posts
Top