|Topic Review (Newest First)|
|05-21-2019 05:45 PM|
|Rise||I got those as well from ebay, does the job so far.|
|05-21-2019 02:57 PM|
these are the ones we bought, they work....not the greatest but they do work. Done about 15 wheel changes with them on, haven't had an issue
|05-18-2019 11:12 PM|
i have the T-REX RACING spools which clamp around the swingarm. they do not interfere with the chain adjustment or axle nuts.
|05-18-2019 02:37 AM|
This is a CBR250 but should be about right.
|05-17-2019 02:37 AM|
Double post and then bump...
I have refrained from replying because I'm not very mechanical, and this is not my wheelhouse, but if memory serves the available spools are mounted to the axle itself more or less. If I recall correctly, adjusting the chain slack requires loosening the axle nut, but you don't fully disassemble anything. I'd assume that this procedure can be done with the spools installed.
That said, I have a set of pit bull stands that lift the rear end by the swingarm. That has never given me trouble. Sure, in theory, the security of spools is awesome, but in practice unless you plan to leave the bike on the stands overnight it doesn't really matter.
|05-16-2019 01:14 AM|
|05-14-2019 11:58 PM|
Spools installation *new rider*
Hello, I just bought my first bike a 2014 Cbr500r. I also bought a rear stand from venom and spools to install to make it easier to lift the bike. I watched a bunch of videos on how to instal the spools and realized i have to install the mounting bracket for my spools at the same spot as my adjuster nuts that adjust my chain.I need to remove the nuts in order to add the mounting bracket. So by removing the nuts will this affect the chain tightness? and after I install the spools if i want to adjust my chain do I have to remove the spools each time or can I adjust the chain with the spools still on? (Since the adjusters will now be after the mounting bracket). I am a new rider so if someone can explain this to me in detail it will be greatly appreciated!!