eds eds is offline
|01:25 AM - eds mentioned GlenAnderson in post Made a little headway with the snatchy accelerator at low speeds
...-stop). Agree with GlenAnderson, it is "jerky" and h...
|01:25 AM - eds mentioned Nemo1966 in post Made a little headway with the snatchy accelerator at low speeds
I think what Nemo1966 mean by "jerky" is m...
|11:04 PM - iliodi mentioned eds in post Rear hugger
As eds has stated, the CR25...
|06:56 PM - sashsania mentioned eds in post Shall I only change tires in a SET? (aka no brand mixing)
eds We don't have Roads...
|04:10 AM - chzeckmate mentioned eds in post Rear tire hugger CBR300 retrofit color scheme
...ng. In regard to eds post, I'm curious ab...
|11:00 PM - eds mentioned bambams in post Today I Dropped A Motorcycle For The Second Time (Again, My CBR500R)
bambams, From the looks of ...
|05:45 PM - eds mentioned wheelswillroll in post measuring valve clearance
wheelswillroll, what is the correct...
|06:00 PM - eds mentioned BurnSween in post CBR 250R Rear Hugger
@BurnSween, Search this forum,...
|11:32 PM - eds mentioned DkD in post gear box issue / Shifting
...hift. Agree with @DkD. I found that cleane...
|05:14 AM - EagleMoto mentioned eds in post Bike batteries
Credit goes to eds as it turned out the...
|08:32 PM - eds mentioned EagleMoto in post Bike batteries
@EagleMoto, My guess is the en...
|05:09 PM - eds mentioned tothezenith in post 15wt Fork Oil Upgrade
tothezenith, Thanks mate. Hope ...
|08:57 PM - pohlmeyr mentioned eds in post Digital temperature meter
eds where did you get th...
|11:31 PM - Decided to Ride mentioned eds in post Fuel Octane Level For The 500R
eds some have said to wa...
|08:53 AM - wendyjboss quoted eds in post Feeling sad cause these bikes are hard to work on
Search this forum for th...
|08:03 PM - eds quoted hillscbr in post Battery suggestions
Out of interest how old and h...
|08:45 PM - steveinsandiego quoted eds in post Lane filtering
Filter when safe to do s...
|07:52 PM - batesy322 quoted eds in post Cold Start issues (long cranking 2015 cbr500r)
As stated in the manual,...
|02:24 PM - Frankenschwinn quoted eds in post Best exhaust for my new cbr 500r?
...or other mods.) Hi Eds, do you have picture...
|09:08 PM - eds quoted SirBeaver in post Electrical faults, random fails to start
with running engine but withou...
|10:57 PM - eds quoted Koolkozak in post Switch to full synthetic or not? 8000miles in...
Synthetic it is. Will see if i...
|01:47 AM - hillscbr quoted eds in post 2016 CBR500R vs CBR650F
Like EU (Europe), AU (Au...
|07:30 AM - 5HIFTY quoted eds in post 2016 Air Duct Comparison
Yes, fitted to 2014 mode...
|08:55 AM - Nemo1966 quoted eds in post Made a little headway with the snatchy accelerator at low speeds
I think what @Nemo1966 m...
|05:17 AM - GlenAnderson quoted eds in post Made a little headway with the snatchy accelerator at low speeds
I think what Nemo1966 me...
|12:05 AM - eds quoted blipco in post EBC Double-H Sintered Brake Pads
I can swear I sense some br...
|11:18 PM - revjeppo quoted eds in post Greetings from Sydney
I was in the same boat, ...
|04:10 PM - eds quoted Thump in post New Rebel 500 ...
^ The Z650 looks at first ...
|10:34 PM - eds quoted roksonic in post Rear hugger
aren't they incompatible beca...
|04:34 AM - roksonic quoted eds in post Rear hugger
Just buy cbr300r (or 250...
|09:43 PM - iliodi quoted eds in post Shall I only change tires in a SET? (aka no brand mixing)
My rear oem d222 was squ...
|05:09 PM - eds quoted Ben in post 2016 CBR500R vs CBR650F
I was looking at the 650...
|06:50 PM - sashsania quoted eds in post Shall I only change tires in a SET? (aka no brand mixing)
My rear oem d222 was squ...
|09:31 PM - blipco quoted eds in post Brake Pad Upgrade !
...ial rubber grease needs to be used. Any petr...