2013+ Honda 500R, F, and X Exhaust Thread - Page 3 - Honda CBR500R Forum : CB500F and CB500X Forums
 223Likes
Reply
 
LinkBack Thread Tools
post #21 of 658 (permalink) Old 02-27-2013, 07:43 PM Thread Starter
Senior Knee Dragger
 
NSR_Devil's Avatar
 
Join Date: Dec 2012
Posts: 286


Akrapovic Slip-On Exhaust Stainless Steel HONDA CB500F 2013-2013 #9971110

Quote:
Fits Years: 2013-2013

The Akrapovic slip on exhaust is a parallel line to the Bolt-on series and is based on a simple replacement of the stock exhaust muffler together with the link pipe. The rest of the stock exhaust system remains untouched. The Akrapovic slip on exhaust system is developed and fine-tuned for each specific model of motorcycle, and is the last step before a serious tune-up involving the replacement of the entire exhaust system.
The Akrapovic Slip on system is not designed for extreme high performance, but is intended for the customer to whom aural and visual enhancement is more important than setting the quickest lap times. This system produces a much richer and deeper sound than the quite restrictive stock exhaust. The SLIP-ON system will give your bike a completely new aesthetic effect. The oval-section muffler, available in either titanium or carbon-fiber outer sleeve, will accentuate the beauty of the lines of your bike, and the logo on the muffler will be a constant affirmation of your discerning taste.
Of course performance has not been forgotten. Your motor's potentials will be awakened; the designs for this system come from the same department which designs the racing versions of Akrapovic exhaust systems. In addition, due to the use of high-tech materials, you will gain weight savings and improve the overall characteristics of your bike.
For perfect performance, throttle response and durability special developed mapping from Dynojet has to be used. MAPS are available at powercommander.com
Akrapovic Slip On Exhaust Features:
Carbon or titanium sleeve options.
Hydroformed link pipe included with each system.
Lightweight carbon fiber muffler clamps.
Each system tested and designed for maximum performance.
All internal parts of canisters are made of titanium.
Replacement sleeves available for most models.
Price $478.36


Four wheels move the body. Two wheels move the soul.
NSR_Devil is offline  
Sponsored Links
Advertisement
 
post #22 of 658 (permalink) Old 02-28-2013, 12:20 PM
Senior Member
 
rrkenz's Avatar
 
Join Date: Feb 2013
Posts: 272


Akrapovic Slip-On Exhaust Stainless Steel HONDA CB500F 2013-2013
Fits Years: 2013-2013

The Akrapovic slip on exhaust is a parallel line to the Bolt-on series and is based on a simple replacement of the stock exhaust muffler together with the link pipe. The rest of the stock exhaust system remains untouched. The Akrapovic slip on exhaust system is developed and fine-tuned for each specific model of motorcycle, and is the last step before a serious tune-up involving the replacement of the entire exhaust system.
The Akrapovic Slip on system is not designed for extreme high performance, but is intended for the customer to whom aural and visual enhancement is more important than setting the quickest lap times. This system produces a much richer and deeper sound than the quite restrictive stock exhaust. The SLIP-ON system will give your bike a completely new aesthetic effect. The oval-section muffler, available in either titanium or carbon-fiber outer sleeve, will accentuate the beauty of the lines of your bike, and the logo on the muffler will be a constant affirmation of your discerning taste.
Of course performance has not been forgotten. Your motor's potentials will be awakened; the designs for this system come from the same department which designs the racing versions of Akrapovic exhaust systems. In addition, due to the use of high-tech materials, you will gain weight savings and improve the overall characteristics of your bike.
For perfect performance, throttle response and durability special developed mapping from Dynojet has to be used. MAPS are available at powercommander.com
Akrapovic Slip On Exhaust Features:
Carbon or titanium sleeve options.
Hydroformed link pipe included with each system.
Lightweight carbon fiber muffler clamps.
Each system tested and designed for maximum performance.
All internal parts of canisters are made of titanium.
Replacement sleeves available for most models.
$478.36

!!!
rrkenz is offline  
post #23 of 658 (permalink) Old 03-01-2013, 09:57 PM
Junior Member
 
Join Date: Mar 2013
Posts: 1
I really like the K speed one but i cant find any vendor for it
4ForAll is offline  
 
post #24 of 658 (permalink) Old 03-02-2013, 07:37 AM
Member
 
Join Date: Jan 2013
Location: Queensland, Australia
Posts: 87
K-Speed website translated using google here

I emailed them awhile back to see if they'd ship to australia, but no luck
Unclefugger is offline  
post #25 of 658 (permalink) Old 03-03-2013, 01:30 AM
Super Moderator
 
loserlazer's Avatar
 
Join Date: Feb 2013
Location: Bangkok
Posts: 2,119
Quote:
Originally Posted by jerros View Post
Just spotted the Akrapovic slipon for the 500f on indy superbikes.com. I don't think there are any exhaust differences between the F & R models so...

Akrapovic Slip-On Exhaust Stainless Steel HONDA CB500F 2013-2013 - Indysuperbikes
But the bike pictured is not a cb500f. It is i think it is cb inline four. I checked the photos of akrapovic too but could not see one.


http://www.moriwaki.co.jp/global/pro...X/S/INTEGRA#2I

Found this link regarding moriwaki pipe. The black pearl full system described for nc700 here in this link is same as the moriwaki full system for cbr500 they sell here. I can get one even today from honda bigwing in bangkok but pricey for 1100 usd including all work and i would like to see some dynos first. But black pearl color looks very good quality, certified for sound and emmission laws of thailand so police cannot stop you for nothing and made 100 percent in japan. I liked its tone. Not loud but sounds distinctive and barky. If they made the tip in black, it could look better though.
Still, I am tempted really as it is getting dangerous with the silent stock pipe so do not want to wait too long from other manufacturers.
Attached Images
File Type: jpg 01810-651H8-00.jpg (111.8 KB, 100 views)

Last edited by loserlazer; 03-03-2013 at 01:33 AM.
loserlazer is offline  
post #26 of 658 (permalink) Old 03-05-2013, 03:52 AM
Junior Member
 
Join Date: Feb 2013
Posts: 2
Two brothers

Looking on eBay two brothersSBK are doing a selection from 274 to around 600 I think these prices probably start stainless slip on to full system carbon ti etc no pics to speak of just PDF schematics
I'm looking around for mods as I have a test booked end if march here in uk when local dealer is expecting the cbr5oo to come in
I'm interested as I have a 2010 er6n now loads of mods full MTC race exhaust which sound evil but at the moment there not doing the cbr500 probably will when there more common
Cheers Jedi
P.s I do heavy miles so looking to go down to the cbr500r fuel etc
My tuned up er6n I'm getting 33mpg I have a heavy right hand lol
Test rode a nc700 a little to sensible great as everyday bike but lacking in fun for the weekend
I do aprox 15000 miles a year
jedi890 is offline  
post #27 of 658 (permalink) Old 03-06-2013, 11:32 AM
Senior Member
 
Scisorro's Avatar
 
Join Date: Mar 2013
Posts: 175
2013 Honda CBR500R LXRace X Pure Black Slip On Exhaust System

2013 Honda CBR500R LXRace X Pure Black Slip On Exhaust System

Just saw this slip on exhaust online for the cbr500r. This slip on is marketed as a very affordable exhaust but still maintains quality. the only real difference between this one and the others is the material, instead of carbon fiber light aluminum and steel is used. Weighing in only a 3.4 kg. And for the cost 390.00$ So if your in the market for an entry level slip on exhaust this might be the one for you. Just wish they had a sound clip so i can share that with you guys too. Doesnt look too bad eh.



Scisorro is offline  
post #28 of 658 (permalink) Old 03-06-2013, 11:46 AM
Junior Member
 
Join Date: Feb 2013
Posts: 2
and leo vance are doing a full range from cheap slip-ons to full system there on ebay
jedi890 is offline  
post #29 of 658 (permalink) Old 03-08-2013, 11:19 AM
Senior Member
 
Scisorro's Avatar
 
Join Date: Mar 2013
Posts: 175
Are you serious? Usually exhaust systems dont end up on ebay for a while. And the cbr500 hasnt even been released yet on the market. are you sure you have the right model of bike? Maybe you got confused with CB500 which the new cbr500's chassis is based off of but was discontinued already.
Scisorro is offline  
post #30 of 658 (permalink) Old 03-08-2013, 02:45 PM
Senior Member
 
rrkenz's Avatar
 
Join Date: Feb 2013
Posts: 272
Akrapovic
Honda CBR 500 R - Akrapovi

Leo Vince
HONDA CBR 500 R Exhaust

Nothing on the pages yet but the pages are there so it means they are planning to.
rrkenz is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda CBR500R Forum : CB500F and CB500X Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome